If you are filling empty capsules with coconut oil, herbal infused oils or other liquid ingredients, you may occasionally find that the capsules begin to leak after filling.
In many cases, the problem is not the capsule itself.
The capsule may simply not be fully locked after filling.
This is particularly important when using Licaps® or other two-piece hard capsules for oils and semi-solid formulations.
Licaps® Can Be Gelatin Capsules
A common misunderstanding is that Licaps® means the capsule is made from a completely different material from gelatin.
That is not necessarily the case.
Licaps® refers to a capsule system designed for liquid and semi-solid filling applications. Depending on the product specification, the capsule shell itself may still be made from gelatin.
Therefore, seeing both “Licaps®” and “gelatin” on the packaging is not necessarily contradictory.
The Most Important Step: Fully Lock the Capsule
After filling the capsule, do not simply place the cap loosely over the body.
The capsule must be pushed into its final locked position.
Hold both ends of the capsule and press firmly towards the centre.
You may need to press reasonably hard. Continue pressing until you feel or hear a definite click.
That click indicates that the cap and body have moved into the locked position.
If the capsule has not been completely locked, there may still be a small gap between the two halves. With powders, this may not always cause an obvious problem. With oils, however, even a very small gap can allow the contents to gradually escape.
Why Oil Makes Incorrect Locking More Obvious
Oil behaves very differently from powder. A powder tends to remain inside the capsule body even if the capsule is not perfectly closed, while liquid oils can move through very small spaces.
An incorrectly locked capsule may initially look fine, but later you may notice oil around the capsule joint, sticky capsules, capsules sticking together, oil inside the storage container, or gradual loss of contents.
Before assuming that the capsule shell is dissolving, first check whether the capsule has actually reached its final locked position.
A Simple Test You Can Do
If your oil-filled capsules are leaking, try a few capsules manually before changing capsule type.
- Fill the capsule with your oil or semi-solid mixture.
- Join the cap and body together.
- Press firmly from both ends towards the middle.
- Continue until you feel the click and the capsule is fully locked.
- Leave the filled capsules for a period of time and check for leakage.
If manually locked capsules remain intact while capsules assembled by your filling machine leak, the issue may be the closing pressure rather than the capsule material.
Powder Capsule Filling Machines and Liquids
Many small capsule filling machines are designed primarily for powders. They are excellent for vitamins, minerals, herbal powders, amino acids and supplement blends.
However, when filling oils, the machine may bring the capsule cap and body together without applying enough pressure to push every capsule completely into its final locked position.
This can be difficult to notice visually. When using a manual powder capsule machine for oils, it is therefore worth checking the capsules individually after removal and pressing both ends together to confirm that each capsule has fully locked.
Should You Refrigerate Coconut Oil Before Filling?
Cooling coconut oil can make it firmer and sometimes easier to handle, but refrigeration does not solve an improperly locked capsule.
If the two halves have not fully engaged, the oil may still leak once the contents warm up again. Very cold or solidified oil can also make accurate filling more difficult.
The most important first step is therefore to check the capsule closure.
Is a Different Capsule Material the Answer?
Not necessarily.
If an oil-filled capsule leaks because the cap and body have not been completely locked, simply switching from gelatin to another capsule material may not solve the problem.
Before changing capsule type, check whether the formulation is suitable for the capsule, whether oil has contaminated the joint, whether the cap is fully pushed onto the body, whether the capsule has reached its final locked position, and whether your filling machine is applying sufficient closing pressure.
Avoid Getting Oil on the Capsule Joint
Keep the upper part of the capsule body as clean as possible during filling. Oil on the area where the cap and body join can make correct closure more difficult and can also create the appearance of leakage.
Avoid overfilling the capsule and leave enough room for the cap to close properly.
For Small-Batch Oil Filling
If you are filling small quantities at home or for product development, you may not necessarily need specialised industrial equipment.
Fill the capsules carefully, avoid getting oil around the rim, fit the cap, remove the capsules from the filling tray, then press each capsule firmly from both ends until you feel the locking click.
For small batches, this simple final check can make a significant difference.
For Larger-Scale Liquid Capsule Production
For larger production volumes, dedicated liquid capsule filling and sealing equipment may be more appropriate. Professional systems can provide greater control over fill weight, liquid dispensing, capsule closure, sealing and production consistency.
The Quickest Thing to Check
If your oil-filled capsules are leaking, do this before anything else:
Take one filled capsule and press both ends firmly towards the middle until you feel a click.
Then compare it with one that has only been lightly closed. You may find that the difference is simply whether the capsule has reached its fully locked position.
Need Help Choosing Capsules for Oils?
If you are filling coconut oil, herbal infused oils, semi-solid ingredients or other liquid formulations and are unsure which capsule is suitable, contact the Pure Capsules® team.
Tell us what you are filling, whether it is liquid or semi-solid at room temperature, your capsule size, and approximately how many capsules you fill at a time. We can help you identify the most suitable capsule and filling method for your application.






